Dysk używany. Prezentuję dane S.M.A.R.T.

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda 7200.14 (AF)

Device Model: ST1000DM003-1ER162

Serial Number: Z4YBPKCZ

LU WWN Device Id: 5 000c50 087c57313

Firmware Version: CC45

User Capacity: 1,000,204,886,016 bytes [1.00 TB]

Sector Sizes: 512 bytes logical, 4096 bytes physical

Rotation Rate: 7200 rpm

Form Factor: 3.5 inches

Device is: In smartctl database 7.3/5319

ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b

SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is: Sat Aug 3 19:48:23 2024 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 80) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 103) minutes.

Conveyance self-test routine

recommended polling time: ( 2) minutes.

SCT capabilities: (0x1085) SCT Status supported.

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 107 099 006 Pre-fail Always - 14642264

3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0

4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 404

5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0

7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 306295296

9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16899

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 404

183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0

184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0

187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0

188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0

189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0

190 Airflow_Temperature_Cel 0x0022 065 053 045 Old_age Always - 35 (Min/Max 26/37)

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0

192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 63

193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 504

194 Temperature_Celsius 0x0022 035 047 000 Old_age Always - 35 (0 18 0 0 0)

197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 16909h+51m+44.302s

241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 74762288978

242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 237973730637

SMART Error Log Version: 1

No Errors Logged

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline Completed without error 00% 2 -

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.