USR-LG206 LoRa RS232 / RS485 Converter Kod producenta USR-LG206-H-P
USR-LG206 LoRa RS232 / RS485 Converter
USR-LG206-P
Serial RS232 RS485 to LoRa Converters | Point to Point LoRa Modems

USR-LG206-P is a serial RS232/485 to LoRa converter, which supports point-to-point protocol and fixed-point transmitting mode.

● Point to Point LoRa Modems

● Supports point-to-point protocol and fixed-point transmitting mode

● Long communication distance, anti-interference, peer to peer

● Support hardware watchdog.

Realize point-to-point data transmission between two serial devices by two lora modems without any data transmission protocol

USR-LG206 LoRa RS232 / RS485 Converter Producent Inna

SX127X solution:

Ultra-low power demand design

Powerful anti-interference capacity

Long communication distance:

Long transmission distance and powerful penetrating power.

Data transmission is more stable than traditional mode.

Be suited to long-distance data collection.

Anti-interference High receiving sensitivity:

Unique signal frequency spectrum amplification

Receiving sensitivity can reach -138.5dBm

Hardware protection:

Full wired terminal installation and protection for lightning strike

High current protection for power supply and interface

2KV RS485 anti-surge protection: 2KV

Over-current protection for power supply

EFT:

When there is instantaneous high current in the circuit(such as power switch, etc.), it can ensure that the device hardware is not damaged.

±2KV Power supply interface ±2KV

±2KV Ethernet interface and serial port ±2KV

ESD:

Prevent electrostatic damage equipment(Such as: dust electrostatic, electric arc, etc.)

±15KV Air ±15KV

±8KV Contact ±8KV

Watchdog:

Well-designed hardware watchdog which can realize 24 hours stable operation.

USR-LG206 LoRa RS232 / RS485 Converter EAN (GTIN) 3093847726872
Przemysłowy zakres temperatury pracy od -30℃ do +80℃
Pobór prądu przy zasilaniu 12V w trybie transmisji danych: 45mA
Pobór prądu przy zasilaniu 12V w trybie czuwania: 12mA
W zestawie:

LoRa Converter USR-LG206-H-P ( 803Mhz~930Mhz )
Antena 800-1020MHz ( taka jak na zdjęciu)
Zasilacz 5V / 1A
Kabel RS232 żeńsko - żeński
Do pobrania, dokumentacja oraz oprogramowanie do konfiguracji urządzenia:

[User Manual]USR-LG206-P-point-to-point-transmission - LINK https://www.pusr.com/Support/download_hits.html?id=75

[User Manual]USR-LG206-P-transparent-transmission-mode - LINK https://www.pusr.com/Support/download_hits.html?id=76

[User Manual]USR-LG206-P User Manual_V1.0.6.01 - LINK https://www.pusr.com/Support/download_hits.html?id=107

[Setup Software]USR_LoRa_SET-V1.0.8.rar - LINK https://www.pusr.com/Support/download_hits.html?id=310

[Certificate]LG206_CE_FCC_Certificates_and_reports_2018 - LINK https://www.pusr.com/Support/download_hits.html?id=401