Na sprzedaż profesjonalny interfejs Motu (Mark of the unicorn) Traveler, pierwszej generacji. Kupiony z w celu wykorzystania go jako DAC/ADC w komputerowym systemie DSP. Z braku czasu muszę porzucić projekt, wszystkie interfejsy sprzedaję.
Stan wizualny bardzo dobry - nie jest 'zmęczony życiem', został ujęty na zdjęciach.
Stan techniczny - bardzo dobry/idealny, udało mi się sprawdzić niemal wszystkie we/wy i funkcje, nie znalazłem problemów.
Interfejs posiada złącze FireWire, przez które może być również zasilany.
Może pracować samodzielnie i/lub być podłączony do komputera poprzez np. kartę FireWire na pcie (mam na sprzedaż na innych aukcjach). Działa również na przejściówkach od Apple na Thunderbolt 2 oraz Thunderbolt 3/4, na takich przejściówkach używałem go w komputerze z linuxem. Pewnie również zadziała na z tymi przejściówkami z USB4, nie sprawdzałem.
W zestawie:
interfejs,
kabel firewire 600/600,
nieoryginalny zasilacz (oryginały 'padają jak muchy'),
opakowanie zastępcze
Strona producenta:
https://motu.com/products/motuaudio/traveler-old
Opis producenta:
Sturdy lightweight construction—ready to travel with you anywhere.
Compact size (14.75 x 9 inches)—fits easily into a napsack, briefcase or computer bag and sits perfectly under any laptop.
Powered by computer* or battery—no additional power supply necessary for complete recording freedom.
20 channels with 4 mic inputs—all the I/O you need.
Individual 48V phantom power—mix and match microphones.
Digital Precision Trim™—adjust preamp gain in 1dB increments; save and recall multiple trim setups.
Record at sample rates up to 192kHz.
CueMix DSP™—provides latency-free monitoring system.
Front-panel control—access your entire mix, or any Traveler setting, directly from the front panel.
Stand-alone operation—program your mixes at the studio and then bring the Traveler to your gig—no computer needed. Just plug in any DC power adapter (10-24 volts, tip positive or negative). Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
Multiple CueMix DSP mixes—create different monitor mixes for the main outs and headphones. Add send/return loops for outboard gear—with no latency.
Four mic pre-amps with switchable 48-volt phantom power, front-panel
Digital Precision Trim™ controls and pre-amplified sends.
20 inputs / 22 outputs—there's no channel sharing in the Traveler; the mic inputs, S/PDIF I/O, AES/EBU I/O, and headphone out are all handled as simultaneously active, independent channels.
8 channels of 24-bit ADAT optical input/output. Eight channels at 44.1/48kHz. Four channels at 88.2/96kHz.
Sample-accurate digital transfers between ADAT digital tape decks and the computer via the ADAT sync port.
Sample-accurate MIDI—connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
Expandable—add additional 828, 828mkII, 896 or Traveler FireWire interfaces for additional I/O.
Eight 24-bit 192kHz outputs on balanced/unbalanced 1/4" TRS jacks
Four 24-bit 192kHz inputs on balanced/unbalanced 1/4" TRS jacks
Separate headphone jack, with independent volume control.
Stereo 24-bit 96kHz S/PDIF in/out
Word clock in and out
Sample-accurate ADAT sync
Built-in SMPTE time code sync
Includes drivers for Mac & PC, including ASIO, WDM, Wave, GSIF, Core Audio, and Core MIDI. Supports all popular Macintosh and Windows audio software.
100% compatible with all host-based effects processing in today's popular audio programs.
Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
Two FireWire ports for daisy-chaining without a hub
Front panel meters for all analog, digital and MIDI I/O, plus SMPTE sync tach and lock LEDs.
Dedicated front panel clock status LEDs.
*Bus power requires a non-adapted 6-pin FireWire port
