Product Name:

DC 6-24V 4CH RS485 TTL232 Multifunction MOS Transistor Solid State Relay Module Modbus RTU AT Command for PLC Motor PTZ LED

1. With RS485 and TTL232 interfaces, the two interfaces are independent of each other and can be used at the same time.
2. 4-channel MOS tube output (01-04), the maximum driving capacity is 3A, NPN low-level output, can drive resistive and inductive loads such as LED relays, low-power motors, and solenoid valves.
3. 8-channel 5V TTL port output (05-012) , the maximum driving capacity is 10 mA. Default low level output (NPN), can be set to high level output (PNP) by command
4. in order to work stably, the power supply power must be greater than 2 times the load power, if it is an inductive load, more than 3 times
5. By default, AT command and Modbus RTU command can be used at the same time. The two pads of MO are welded together, and only Modbus RTU command can be used.

Opis:

1.Working voltage: DC 6-25V
2.Working current: 10-15MA
3.Compatible with two command control
modes, AT command and MODBUS RUT
command
4.AT command: ON/OFF/Self-locking/
Inter-locking/Momentary/Delay, delay time
0.1-9999.9 seconds
5.MODBUS RTU command supports
01/03/05/06/15/16 function code
6.In MODBUS command mode, up to 247
devices can be used in parallel
7. With RS485 and RS232 (TTL) dual bus
interface, the two interfaces can be used at
the same time
8.4-channel 3A MOS tube output (O1-O4)
9. 8-channel 5V TTL level output pins
(05-012), low level (default)/high level
output
10. Size: 96.5*35*15mm
11. Weight: 27 gr

Mamy wiele filmów z lekcją na kanale YouTube, aby nauczyć się samodzielnie skonfigurować ustawienia:
https://youtu.be/DZia4kiJ1Ac?si=jtWF3h2kvEamkVEM
https://youtu.be/d-W_M721nIc?si=9rp50w_CDIewmP0I
https://youtu.be/nphqfvt9UJg?si=_HVpQgr9i7DG1xfy

PLC IO expansion board

Smart Home,Home Automation ,Wiser Home;

DC motor drive;
Relay Solenoid Valve;
Security Monitoring;
Identification system;
Current and voltage meters;
LED Lamp Drivers;
Automatic curtain control