Spawarka do światłowodów FITEL S175 + walizka transportowa

Komplet walizka, przewód zasilający.
Brak nożyka, strippera do światłowodów.
Sprawna po wymianie elektrod.
Made in Japan

SPECIFICATIONS

Applicable Optical Fiber

Silica glass-based optical fibers SM/MM/DSF/EDF/TrueWave®/LEAF®

Coating/Clad Dia.: 0.25-0.9mm

Cleave Length: Standard 16mm or 10mm only for 0.25 mm coating diameter and 16 mm

for 0.9 mm coating; Optional 10 mm for 0.25-0.9 mm coating

Applicable sleeves: 40 or 60mm

Splice Performance

Average loss: SM: 0.02 dB; MM: 0.01 dB; DS: 0.04 dB (with identical Furukawa fibers)

Reflection: -60 dB or lower

Operating time: Splice: 17s (typicaly at high speed mode)

Heat: 90 s

Tension test: 200 g (0.4 lbs)

Equipment

Built-in cooling fan

LCD: 5’’ color with anti-reflection coating Video: NTSC (PIN connector)

Data: RS232C (D-sub 9 Pins male) Memoria: 400 splices

Sensor: air pressure, temperature, humidity Lamp: V-Groove illumination

Operating Environments

Temperature: -10 to 50°C (14 to 122°F) Storage: -40° to 60°C (-40° to 140°F)

Function

Auto sleep mode Remote Control from PC Attenuation splicing: Optional 0 to10 dB by 0.1 dB

32 splice program with one auto splice mode – 9 pre-programmed; 28 customizable

Inspection: Cleave angle, fiber end gap, core eccentricity, offset, tilt, micro bending, bubble at spliced point

Display information: operating message; arc counter, clock, heater status, estimation loss, finder image

X- and Y-views Message: A capacity to store 9 languages. Contact your dealer for details

Size/Weight

Size/weight – 181W x 285D x 181H mm / 6.3 kg 7.1 “W x 11.2” D x 7.1 “H/13.9 lbs.

Power

AC 100/120, 200/240 V 50/60 Hz DC 10-16.5V with LED indicator

Power consumption: Max. 70 W, typical 27 W, sleep 20 W